V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder Takeshi Teruya

Takeshi Teruya

You may need to trim the shaft down around 3-4mm's if it is touching

The GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set

The GKTECH S/R chassis rear Swaybar end links are a direct replacement of the OEM end link but with Polyurethane bushes rather than the OEM (typically worn) rubber bushes

NOTE: If your subframe does not have HICAS please use our S14/S15 version seen: https://au

V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder Takeshi TeruyaThe V2 GKTECH Z33 350Z Z34 370z gearbox cross member has been designed as a bolt on solution when fitting these gearboxes to an S chassis when running either an SR20 KA24 motor. The gearbox cross member has been designed to use an OEM S13 S14 gearbox mount such as our polyurethane solid mount that we also make, seen here; Solid S13 S14 S15 R32 GTS T SKYLINE BILLET ALUMINIUM SOLID GEARBOX MOUNT Polyurethane V2 POLYURETHANE GEARBOX MOUNT 6mm steel