Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, SMA Connectors 8083-9B This sieve reflector nozzle (EDMO#

This sieve reflector nozzle (EDMO# 110038725) is used for heating and distributing air around heat-shrink tubing

This ADS autopilot installation hardware kit (EDMO# 9645111080) facilitates the installation of the Garmin GFC500 into the Cessna 210 D/E/F aircraft per drawing number 190-02291-80 in the installation manual

oneshot installation at the work bench or on the assembly line

reduced power consumption

Knurled mounting screws (1/4 - 20) may be purchased separately

Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, SMA Connectors 8083-9B This sieve reflector nozzle (EDMO#The ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2 J8)