Nilfisk Attix 30/50 Combination Floor Nozzle 107417892 AirLocker The UX8012 must be applied

The UX8012 must be applied at the pre-set temperature of 390 degrees on the HB220 glue gun in order to achieve maximum bond strength and an open time of 40 seconds

Powr-Flite PEB Extractor Brush For Cold Water - Powered extractor brush can be used with any upright or box carpet extractor using cold water

Steel Crevice Nozzle for VHS255 - Crevice Nozzle is ideal for cleaning hard-to-reach areas such as in between machinery or under heavy equipment

On board of the SALTIX 10 there is a place for everything

Triple planetary gear transmission

Nilfisk Attix 30/50 Combination Floor Nozzle 107417892 AirLocker The UX8012 must be appliedATLO Attix 30 50 Combination Floor Nozzle 107417892 This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled plate to contact the carpet, pulling air through the fiber