Front Beam Adjusters Freight:No Shipping that weld to the front

that weld to the front beam

As the bus is lowered

Type II Bay Driver Door

We used to use a camber/toe adjuster on the end of the control arm

The centre slot in the rachet adjuster has been machined so that the adjuster will have about 11" of adjustment

Front Beam Adjusters Freight:No Shipping that weld to the frontWe have been manufacturing our front beam adjusters now for more than 18 years. We made these to suit the bay window bus beams but can be adapted to suit the split screens smaller tube beam. These are a rachet type, that weld to the front beam. We also supply with our kit, longer set screws with a standard thread so the standard lock nut can be used. Note that we also sell bump stop plates that will make the bump stop adjustable as well. The centre